Item list of H7CX-R
Panel cutouts are as shown below (according to DIN43700).
Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
H7CX-R
Tachometer
DIN 48 × 48 mm Socket-type Tachometer with a Bright, Easy-to-view, Backlit Negative Transmissive LCD
about this Product Family
Related Contents
- Control Components
- Features
- Lineup
- Specifications
- Dimensions
- Catalog
last update: November 12, 2012
Caution: All units are in millimeters unless otherwise indicated.
Tachometers
Dimensions without Flush Mounting Adapter
H7CX-R[]-N
Dimensions with Flush Mounting Adapter (Adapter and Waterproof Packing Ordered Separately)
H7CX-R[]-N
Panel Cutouts
Note: 1. The mounting panel thickness should be 1 to 5 mm.
2. To allow easier operation, it is recommended that Adapters be mounted so that the gap between sides with
hooks is at least 15 mm (i.e., with the panel cutouts separated by at least 60 mm).
3. It is possible to horizontally mount Timers side by side. Attach the Flush Mounting Adapters so that the surfaces
without hooks are on the sides of the Timers. If Counters/Tachometers are mounted side by side, however,
water resistance will be lost.
2. To allow easier operation, it is recommended that Adapters be mounted so that the gap between sides with
hooks is at least 15 mm (i.e., with the panel cutouts separated by at least 60 mm).
3. It is possible to horizontally mount Timers side by side. Attach the Flush Mounting Adapters so that the surfaces
without hooks are on the sides of the Timers. If Counters/Tachometers are mounted side by side, however,
water resistance will be lost.
Dimensions with Front Connecting Socket
H7CX-R[]-N
* These dimensions vary with the kind of DIN track (reference value).
last update: November 12, 2012
Top of Page