Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

A22

Pushbutton Switch (Cylindrical 22/25-dia.)

A22

Install in 22-dia. or 25-dia. Panel Cutout (When Using a Ring)

about this Product Family

Completely Assembled

Shipped as a set which includes the Pushbutton, Lamp (lighted type only), and Switch.

Non-lighted (Round Type)

Operation Momentary operation
(self-resetting)
Alternate operation
(self-holding)
Illumination
color
Appearance Output Set Set
Round/Flat type
A22-F
1108_lu_1_1
SPST-NO A22-F[]-10M A22-F[]-10A R (red)
Y (yellow)
G (green)
W (white)
A (blue)
B (black)
SPST-NC A22-F[]-01M A22-F[]-01A
SPST-NO + SPST-NC A22-F[]-11M A22-F[]-11A
DPST-NO A22-F[]-20M A22-F[]-20A
DPST-NC A22-F[]-02M A22-F[]-02A
Round/Projection type
A22-T
1108_lu_1_2
SPST-NO A22-T[]-10M A22-T[]-10A
SPST-NC A22-T[]-01M A22-T[]-01A
SPST-NO + SPST-NC A22-T[]-11M A22-T[]-11A
SPST-NO + SPST-NO A22-T[]-20M A22-T[]-20A
SPST-NC + SPST-NC A22-T[]-02M A22-T[]-02A
Round/Full-guard type
A22-G
1108_lu_1_3
SPST-NO A22-G[]-10M A22-G[]-10A
SPST-NC A22-G[]-01M A22-G[]-01A
SPST-NO + SPST-NC A22-G[]-11M A22-G[]-11A
SPST-NO + SPST-NO A22-G[]-20M A22-G[]-20A
SPST-NC + SPST-NC A22-G[]-02M A22-G[]-02A
Round/Half-guard type
A22-H
1108_lu_1_4
SPST-NO A22-H[]-10M A22-H[]-10A
SPST-NC A22-H[]-01M A22-H[]-01A
SPST-NO + SPST-NC A22-H[]-11M A22-H[]-11A
SPST-NO + SPST-NO A22-H[]-20M A22-H[]-20A
SPST-NC + SPST-NC A22-H[]-02M A22-H[]-02A
Round/Small-size
Mushroom type
(30-dia. head)
A22-S
1108_lu_1_5
SPST-NO A22-S[]-10M ---
SPST-NC A22-S[]-01M
SPST-NO + SPST-NC A22-S[]-11M
SPST-NO + SPST-NO A22-S[]-20M
SPST-NC + SPST-NC A22-S[]-02M
Round/Medium-size
Mushroom type
(40-dia head)
A22-M
1108_lu_1_6
SPST-NO A22-M[]-10M
SPST-NC A22-M[]-01M
SPST-NO + SPST-NC A22-M[]-11M
SPST-NO + SPST-NO A22-M[]-20M
SPST-NC + SPST-NC A22-M[]-02M

Note: The contact ratings are for standard loads.

Non-lighted (Square Type)

Operation Momentary operation
(self-resetting)
Alternate operation
(self-holding)
Illumination
color
Appearance Output Set Set
Square/Projection type
A22-C
1108_lu_2_1
SPST-NO A22-C[]-10M A22-C[]-10A R (red)
Y (yellow)
G (green)
W (white)
A (blue)
B (black)
SPST-NC A22-C[]-01M A22-C[]-01A
SPST-NO + SPST-NC A22-C[]-11M A22-C[]-11A
SPST-NO + SPST-NO A22-C[]-20M A22-C[]-20A
SPST-NC + SPST-NC A22-C[]-02M A22-C[]-02A
Square/Guard type
A22-D
1108_lu_2_2
SPST-NO A22-D[]-10M A22-D[]-10A
SPST-NC A22-D[]-01M A22-D[]-01A
SPST-NO + SPST-NC A22-D[]-11M A22-D[]-11A
SPST-NO + SPST-NO A22-D[]-20M A22-D[]-20A
SPST-NC + SPST-NC A22-D[]-02M A22-D[]-02A

Note: The contact ratings are for standard loads.

Lighted (Round Type)

Operation Momentary
operation
(self-resetting)
Alternate
operation
(self-holding)
Illumination
color
Appearance Output Lighting Operating
voltage
Set Set
Round/Projection
type
LED lighting
(without Voltage
Reduction Unit)
A22L-T
1108_lu_3_1
SPST-NO LED 6 VAC/VDC A22L-T[]-6A-10M A22L-T[]-6A-10A R (red)
Y (yellow)
G (green)
W (white)
A (blue)
12 VAC/VDC A22L-T[]-12A-10M A22L-T[]-12A-10A
24 VAC/VDC A22L-T[]-24A-10M A22L-T[]-24A-10A
SPST-NC 6 VAC/VDC A22L-T[]-6A-01M A22L-T[]-6A-01A
12 VAC/VDC A22L-T[]-12A-01M A22L-T[]-12A-01A
24 VAC/VDC A22L-T[]-24A-01M A22L-T[]-24A-01A
SPST-NO +
SPST-NC
6 VAC/VDC A22L-T[]-6A-11M A22L-T[]-6A-11A
12 VAC/VDC A22L-T[]-12A-11M A22L-T[]-12A-11A
24 VAC/VDC A22L-T[]-24A-11M A22L-T[]-24A-11A
SPST-NO +
SPST-NO
6 VAC/VDC A22L-T[]-6A-20M A22L-T[]-6A-20A
12 VAC/VDC A22L-T[]-12A-20M A22L-T[]-12A-20A
24 VAC/VDC A22L-T[]-24A-20M A22L-T[]-24A-20A
SPST-NC +
SPST-NC
6 VAC/VDC A22L-T[]-6A-02M A22L-T[]-6A-02A
12 VAC/VDC A22L-T[]-12A-02M A22L-T[]-12A-02A
24 VAC/VDC A22L-T[]-24A-02M A22L-T[]-24A-02A
Round/Projection
type
LED voltage-
reduction lighting
(with Voltage
Reduction Unit)
A22L-T
1108_lu_3_2
SPST-NO 100 VAC A22L-T[]-T1-10M A22L-T[]-T1-10A
200 VAC A22L-T[]-T2-10M A22L-T[]-T2-10A
SPST-NC 100 VAC A22L-T[]-T1-01M A22L-T[]-T1-01A
200 VAC A22L-T[]-T2-01M A22L-T[]-T2-01A
SPST-NO +
SPST-NC
100 VAC A22L-T[]-T1-11M A22L-T[]-T1-11A
200 VAC A22L-T[]-T2-11M A22L-T[]-T2-11A
SPST-NO +
SPST-NO
100 VAC A22L-T[]-T1-20M A22L-T[]-T1-20A
200 VAC A22L-T[]-T2-20M A22L-T[]-T2-20A
SPST-NC +
SPST-NC
100 VAC A22L-T[]-T1-02M A22L-T[]-T1-02A
200 VAC A22L-T[]-T2-02M A22L-T[]-T2-02A

Note: The contact ratings are for standard loads.

Operation Momentary
operation
(self-resetting)
Alternate
operation
(self-holding)
Illumination
color
Appearance Output Lighting Operating
voltage
Set Set
Round/Half-guard
type
LED lighting
(without Voltage
Reduction Unit)
A22L-H
1108_lu_4_1
SPST-NO LED 24 VAC/
VDC
A22L-H[]-24A-10M A22L-H[]-24A-10A R (red)
G (green)
W (white)
A (blue)
SPST-NC A22L-H[]-24A-01M A22L-H[]-24A-01A
SPST-NO +
SPST-NC
A22L-H[]-24A-11M A22L-H[]-24A-11A
SPST-NO +
SPST-NO
A22L-H[]-24A-20M A22L-H[]-24A-20A
SPST-NC +
SPST-NC
A22L-H[]-24A-02M A22L-H[]-24A-02A
Round/Half-guard
type
LED voltage-
reduction lighting
(with Voltage
Reduction Unit)
A22L-H
1108_lu_4_2
SPST-NO 100 VAC A22L-H[]-T1-10M A22L-H[]-T1-10A
200 VAC A22L-H[]-T2-10M A22L-H[]-T2-10A
SPST-NC 100 VAC A22L-H[]-T1-01M A22L-H[]-T1-01A
200 VAC A22L-H[]-T2-01M A22L-H[]-T2-01A
SPST-NO +
SPST-NC
100 VAC A22L-H[]-T1-11M A22L-H[]-T1-11A
200 VAC A22L-H[]-T2-11M A22L-H[]-T2-11A
SPST-NO +
SPST-NO
100 VAC A22L-H[]-T1-20M A22L-H[]-T1-20A
200 VAC A22L-H[]-T2-20M A22L-H[]-T2-20A
SPST-NC +
SPST-NC
100 VAC A22L-H[]-T1-02M A22L-H[]-T1-02A
200 VAC A22L-H[]-T2-02M A22L-H[]-T2-02A

Note: The contact ratings are for standard loads.

Operation Momentary
operation
(self-resetting)
Alternate
operation
(self-holding)
Illumination
color
Appearance Output Lighting Operating
voltage
Set Set
Round/Full-guard
type
LED lighting
(without Voltage
Reduction Unit)
A22L-G
1108_lu_5_1
SPST-NO LED 6 VAC/VDC A22L-G[]-6A-10M A22L-G[]-6A-10A R (red)
Y (yellow)
G (green)
W (white)
A (blue)
12 VAC/VDC A22L-G[]-12A-10M A22L-G[]-12A-10A
24 VAC/VDC A22L-G[]-24A-10M A22L-G[]-24A-10A
SPST-NC 6 VAC/VDC A22L-G[]-6A-01M A22L-G[]-6A-01A
12 VAC/VDC A22L-G[]-12A-01M A22L-G[]-12A-01A
24 VAC/VDC A22L-G[]-24A-01M A22L-G[]-24A-01A
SPST-NO +
SPST-NC
6 VAC/VDC A22L-G[]-6A-11M A22L-G[]-6A-11A
12 VAC/VDC A22L-G[]-12A-11M A22L-G[]-12A-11A
24 VAC/VDC A22L-G[]-24A-11M A22L-G[]-24A-11A
SPST-NO +
SPST-NO
6 VAC/VDC A22L-G[]-6A-20M A22L-G[]-6A-20A
12 VAC/VDC A22L-G[]-12A-20M A22L-G[]-12A-20A
24 VAC/VDC A22L-G[]-24A-20M A22L-G[]-24A-20A
SPST-NC +
SPST-NC
6 VAC/VDC A22L-G[]-6A-02M A22L-G[]-6A-02A
12 VAC/VDC A22L-G[]-12A-02M A22L-G[]-12A-02A
24 VAC/VDC A22L-G[]-24A-02M A22L-G[]-24A-02A
Round/Full-guard
type
LED voltage-
reduction lighting
(with Voltage
Reduction Unit)
A22L-G
1108_lu_5_2
SPST-NO 100 VAC A22L-G[]-T1-10M A22L-G[]-T1-10A
200 VAC A22L-G[]-T2-10M A22L-G[]-T2-10A
SPST-NC 100 VAC A22L-G[]-T1-01M A22L-G[]-T1-01A
200 VAC A22L-G[]-T2-01M A22L-G[]-T2-01A
SPST-NO +
SPST-NC
100 VAC A22L-G[]-T1-11M A22L-G[]-T1-11A
200 VAC A22L-G[]-T2-11M A22L-G[]-T2-11A
SPST-NO +
SPST-NO
100 VAC A22L-G[]-T1-20M A22L-G[]-T1-20A
200 VAC A22L-G[]-T2-20M A22L-G[]-T2-20A
SPST-NC +
SPST-NC
100 VAC A22L-G[]-T1-02M A22L-G[]-T1-02A
200 VAC A22L-G[]-T2-02M A22L-G[]-T2-02A

Note: The contact ratings are for standard loads.

Lighted (Square Type)

Operation Momentary
operation
(self-resetting)
Alternate
operation
(self-holding)
Illumination
color
Appearance Output Lighting Operating
voltage
Set Set
Square/Projection
type
LED lighting
(without Voltage
Reduction Unit)
A22L-C
1108_lu_6_1
SPST-NO LED 24 VAC/
VDC
A22L-C[]-24A-10M A22L-C[]-24A-10A R (red)
Y (yellow)
G (green)
W (white)
A (blue)
SPST-NC A22L-C[]-24A-01M A22L-C[]-24A-01A
SPST-NO +
SPST-NC
A22L-C[]-24A-11M A22L-C[]-24A-11A
SPST-NO +
SPST-NO
A22L-C[]-24A-20M A22L-C[]-24A-20A
SPST-NC +
SPST-NC
A22L-C[]-24A-02M A22L-C[]-24A-02A
Square/Projection
type
LED voltage-
reduction lighting
(with Voltage
Reduction Unit)
A22L-C
1108_lu_6_2
SPST-NO 100 VAC A22L-C[]-T1-10M A22L-C[]-T1-10A
200 VAC A22L-C[]-T2-10M A22L-C[]-T2-10A
SPST-NC 100 VAC A22L-C[]-T1-01M A22L-C[]-T1-01A
200 VAC A22L-C[]-T2-01M A22L-C[]-T2-01A
SPST-NO +
SPST-NC
100 VAC A22L-C[]-T1-11M A22L-C[]-T1-11A
200 VAC A22L-C[]-T2-11M A22L-C[]-T2-11A
SPST-NO +
SPST-NO
100 VAC A22L-C[]-T1-20M A22L-C[]-T1-20A
200 VAC A22L-C[]-T2-20M A22L-C[]-T2-20A
SPST-NC +
SPST-NC
100 VAC A22L-C[]-T1-02M A22L-C[]-T1-02A
200 VAC A22L-C[]-T2-02M A22L-C[]-T2-02A

Note: The contact ratings are for standard loads.

Operation Momentary
operation
(self-resetting)
Alternate
operation
(self-holding)
Illumination
color
Appearance Output Lighting Operating
voltage
Set Set
Square/Full-guard
type
LED lighting
(without Voltage
Reduction Unit)
A22L-D
1108_lu_7_1
SPST-NO LED 24 VAC/
VDC
A22L-D[]-24A-10M A22L-D[]-24A-10A R (red)
Y (yellow)
G (green)
W (white)
A (blue)
SPST-NC A22L-D[]-24A-01M A22L-D[]-24A-01A
SPST-NO +
SPST-NC
A22L-D[]-24A-11M A22L-D[]-24A-11A
SPST-NO +
SPST-NO
A22L-D[]-24A-20M A22L-D[]-24A-20A
SPST-NC +
SPST-NC
A22L-D[]-24A-02M A22L-D[]-24A-02A
Square/Full-guard
type
LED voltage-
reduction lighting
(with Voltage
Reduction Unit)
A22L-D
1108_lu_7_2
SPST-NO 100 VAC A22L-D[]-T1-10M A22L-D[]-T1-10A
200 VAC A22L-D[]-T2-10M A22L-D[]-T2-10A
SPST-NC 100 VAC A22L-D[]-T1-01M A22L-D[]-T1-01A
200 VAC A22L-D[]-T2-01M A22L-D[]-T2-01A
SPST-NO +
SPST-NC
100 VAC A22L-D[]-T1-11M A22L-D[]-T1-11A
200 VAC A22L-D[]-T2-11M A22L-D[]-T2-11A
SPST-NO +
SPST-NO
100 VAC A22L-D[]-T1-20M A22L-D[]-T1-20A
200 VAC A22L-D[]-T2-20M A22L-D[]-T2-20A
SPST-NC +
SPST-NC
100 VAC A22L-D[]-T1-02M A22L-D[]-T1-02A
200 VAC A22L-D[]-T2-02M A22L-D[]-T2-02A

Note: The contact ratings are for standard loads.

Subassembled

The Pushbutton, Lamp, or Switch can be ordered separately. Use them in combination for models that are not available as assembled Units. These can also be used as inventory for aintenance parts.

A22 Lineup 16

Pushbutton

Non-lighted

Sealing IP65 oil-resistant models
Appearance Flat type
1108_lu_9_1
Projection type
1108_lu_9_2
Full-guard type
1108_lu_9_3
Half-guard type
1108_lu_9_4
Color Model Model Model Model
Red A22-FR A22-TR A22-GR A22-HR
Green A22-FG A22-TG A22-GG A22-HG
Yellow A22-FY A22-TY A22-GY A22-HY
White A22-FW A22-TW A22-GW A22-HW
Blue A22-FA A22-TA A22-GA A22-HA
Black A22-FB A22-TB A22-GB A22-HB

Sealing IP65 oil-resistant models
Appearance Round/Mushroom type
(30-dia. head)
1108_lu_10_1
Round/Mushroom type
(40-dia. head)
1108_lu_10_2
Square/Projection type
1108_lu_10_3
Square/Full-guard type
1108_lu_10_4
Color Model Model Model Model
Red A22-SR A22-MR A22-CR A22-DR
Green A22-SG A22-MG A22-CG A22-DG
Yellow A22-SY A22-MY A22-CY A22-DY
White A22-SW A22-MW A22-CW A22-DW
Blue A22-SA A22-MA A22-CA A22-DA
Black A22-SB A22-MB A22-CB A22-DB

Lighted

Sealing IP65
Appearance Projection type
1108_lu_11_1
Full-guard type
1108_lu_11_2
Half-guard type
1108_lu_11_3
Color Model Model Model
Red A22L-TR A22L-GR A22L-HR
Green A22L-TG A22L-GG A22L-HG
Yellow A22L-TY A22L-GY A22L-HY
White A22L-TW A22L-GW A22L-HW
Blue A22L-TA A22L-GA A22L-HA

Note: Common to incandescent lamps and LED lamps.

Sealing IP65
Appearance Square/Projection type
1108_lu_12_1
Square/Full-guard type
1108_lu_12_2
Color Model Model
Red A22L-CR A22L-DR
Green A22L-CG A22L-DG
Yellow A22L-CY A22L-DY
White A22L-CW A22L-DW
Blue A22L-CA A22L-DA

Lamp

LED Lamp

Operating voltage 6 VAC/VDC 12 VAC/VDC 24 VAC/VDC
Appearance LED light Model Model Model
1108_lu_13_1
AC and DC Red A22-6AR A22-12AR A22-24AR
Green A22-6AG A22-12AG A22-24AG
Yellow *2 A22-6AY A22-12AY A22-24AY
Blue A22-6AA A22-12AA A22-24AA

*1. For voltage-reduction lighting, use the A22-24A[]. Only 24-V LED lamps can be used.
*2. Used when the Pushbutton color is yellow or white.

Incandescent Lamp

Appearance
1108_lu_14_1
Operating
voltage
5 VAC/VDC 12 VAC/VDC 24 VAC/VDC
A22-5 A22-12 A22-24

Switch (Standard Load)

No Voltage Reduction Unit

Classification

Appearance
Non-lighted
1108_lu_15_1
Lighted
1108_lu_15_2
Operation Momentary Alternate Momentary Alternate
Contacts Model Model Model Model
Standard
load
SPST-NO A22-10M A22-10A A22L-10M A22L-10A
SPST-NC A22-01M A22-01A A22L-01M A22L-01A
SPST-NO + SPST-NC A22-11M A22-11A A22L-11M A22L-11A
SPST-NO + SPST-NO A22-20M A22-20A A22L-20M A22L-20A
SPST-NC + SPST-NC A22-02M A22-02A A22L-02M A22L-02A

Voltage Reduction Unit

Classification

Appearance
110 VAC, Lighted
1108_lu_16_1
220 VAC, Lighted
1108_lu_16_2
Operation Momentary Alternate Momentary Alternate
Contacts Model Model Model Model
Standard
load
SPST-NO A22L-10M-T1 A22L-10A-T1 A22L-10M-T2 A22L-10A-T2
SPST-NC A22L-01M-T1 A22L-01A-T1 A22L-01M-T2 A22L-01A-T2
SPST-NO + SPST-NC A22L-11M-T1 A22L-11A-T1 A22L-11M-T2 A22L-11A-T2
SPST-NO + SPST-NO A22L-20M-T1 A22L-20A-T1 A22L-20M-T2 A22L-20A-T2
SPST-NC + SPST-NC A22L-02M-T1 A22L-02A-T1 A22L-02M-T2 A22L-02A-T2

*1. A DPST-NO model is shown here as an example.
*2. For a model with a Voltage Reduction Unit, use the A22-24A[]. Only 24-V LED lamps can be used.

Accessories (Order Separately)

Accessories

Item Appearance Classification Model Remarks
Switch Blocks
1108_lu_17_1
SPST-NO Standard
load
A22-10 Order Switch Blocks to add an
SPST-NO (A22-10) or SPST-NC
(A22-01) Switch Block (for
standard loads) or to replace a
Switch Block.
An A22Z-3003 Three-throw
Spacer is required to
mount three Non-lighted Switch
Units.
Microload A22-10S
SPST-NC Standard
load
A22-01
Microload A22-01S
1108_lu_17_2
DPST-NO Standard
load
A22-20
Microload A22-20S
DPST-NC Standard
load
A22-02
Microload A22-02S
SPST-NO +
SPST-NC
Standard
load
A22-11
Microload A22-11S
Lamp Sockets
1108_lu_17_3
Direct lighting A22-TN
Voltage-
reduction
lighting
110 VAC A22-T1 Used when changing the lighting
method. (LED only)
220 VAC A22-T2
Mounting Latches
1108_lu_17_4
For momentary models A22-3200 Provided as standard. Order
Mounting Latches only when
mounting Switch Blocks or Lamp
Sockets that are purchased
individually.
For alternate models A22-3210
Legend
Plate
Frames
Standard
size
1108_lu_17_5
With Snap-
in Legend
Plate
(Without
text)
White A22Z-3321 Snap-in Legend Plate is acrylic.
Red A22Z-3322
Black A22Z-3323
Without Snap-in Legend
Plate
A22Z-3320
Large
size
1108_lu_17_6
With Snap-
in Legend
Plate
(Without
text)
White A22Z-3331 Snap-in Legend Plate is acrylic.
Red A22Z-3332
Black A22Z-3333
Without Snap-in Legend
Plate
A22Z-3330
Lock Ring
1108_lu_17_7
Round A22Z-3360 This Lock Ring is used when a
more secure lock feature is
required.
Metallic Bezel
Rings
1108_lu_17_8
For flat or projection
models
A22Z-3580 Replace with the standard model.
Material: Copper alloy-Nickel
chrome plating Cannot be used
with the M22.
For full-guard models A22Z-3582
Sealing Caps
1108_lu_17_9
For flat models A22Z-3600F Used to prevent dust or water
from entering the Operation
Unit (Pushbutton, etc.).
Color: opaque
Material: silicon
For projection models A22Z-3600T
For full-guard models A22Z-3600G
Color Caps
1108_lu_17_10
Red A22Z-30TR Used for changing the
Pushbutton color of the (round)
Pushbutton Switches. Cannot be
used, however, with Half-guard
Switches.
Green A22Z-30TG
Yellow A22Z-30TY
White A22Z-30TW
Blue A22Z-30TA
Caps For A22
1108_lu_17_11
For projection, full-guard,
or half-guard models
A22Z-3490 Material: polycarbonate resin
For M22 For round models A22Z-3495
Three-throw
Spacer
1108_lu_17_12
--- A22Z-3003 Used when mounting three
Nonlighted Switches. Cannot be
used withAlternate, Emergency
Stop, Knob-type Selector, Key-
type Selector, or Mushroom-
type Switches.
Hole Plug
1108_lu_17_13
Round A22Z-3530 Can be plugged into pre-cut
panel holes for future expansion.
The color is black.
Color: Black
Control Boxes
(Enclosures)
1108_lu_17_14
One hole A22Z-B101 For those designed A22Z-B1[],
DPST-NO or DPST-NC Switches
cannot be used.
A22Z-B2[] Control Boxes, A22-
series alternate operation
models, and DPST-NO, DPST-NC,
and SPST-NO + SPST-NC
contacts cannot be used.
Material: Polycarbonate resin
A22Z-B201
One hole, yellow box A22Z-B101Y
A22Z-B201Y
Two holes A22Z-B102
A22Z-B202
Three holes A22Z-B103
A22Z-B203
Connectors
1108_lu_17_15
Applicable
cable
diameter
(mm)
7 to 9 dia. A22Z-3500-1 Plastic connector used to extend
a cable from the Switch Box.
9 to 11 dia. A22Z-3500-2
25-dia. Ring
1108_lu_17_16
--- A22Z-R25 Use when mounting to a panel
with a 25-dia. hole. For details,
refer to Catalog. Since this is
not attached to the main body,
order separately.
30-dia. Resin
Attachment
1108_lu_17_17
Round A22Z-A30 Use when mounting to a panel
with a 30-dia. hole. For details,
refer to Catalog.
Lock Plate
1108_lu_17_18
--- A22Z-3380 Use to fix the lever on the
Switch.
Simple
Protective Cover
1108_lu_17_19
--- A22Z-3700 Prevents foreign matter entering
into the Switch from the back of
the panel.

Item Appearance Classification Model Remarks
Snap-
in
Legend
Plates
Standard
size
1108_lu_18_1
Without
text
Black A22Z-3443B Attached to the
Standard-size
Legend Plate Frame.
(See Catalog.)
Material: Acrylic
Red A22Z-3443R
White A22Z-3443W
Transparent A22Z-3443C
With text White text
on red
background
A22Z-3443R-2
STOP A22Z-3443R-4
White text
on black
background
| A22Z-3443B-1
START A22Z-3443B-3
ON A22Z-3443B-5
OFF A22Z-3443B-6
UP A22Z-3443B-7
DOWN A22Z-3443B-8
POWER ON A22Z-3443B-9
OFF-ON A22Z-3443B-10
Large
size
1108_lu_18_2
Without
text
Black A22Z-3453B Used as an
Emergency Stop
Switch Legend
Plate. (See Catalog.)
Material: Acrylic
Red A22Z-3453R
White A22Z-3453W
Transparent A22Z-3453C
For
Emer-
gency
Stop
Switch
1108_lu_18_3
Black text
on yellow
back-
ground
60-dia. round plate with
black letters on a yellow
background
A22Z-3466-1 EMERGENCY STOP
is engraved on the
plate. Used as an
Emergency Stop
Switch Legend Plate
90-dia. round plate with
black letters on a yellow
background
A22Z-3476-1
Character Films
1108_lu_18_4
No print (Round) A22Z-3460 After printing on a
film, affix to the
indicator plate of
the Lighted
Pushbutton Switch.
(The back is coated
with adhesive.)
Character
print
(Round)
| A22Z-3460-1
A22Z-3460-2
START A22Z-3460-3
STOP A22Z-3460-4
No print (Square) A22Z-3480

Tools

Item Appearance Classification Model Remarks
Lamp Extractor
1108_lu_19_1
--- A22Z-3901 Rubber tool used to easily replace Lamps
Tightening Wrench
1108_lu_19_2
--- A22Z-3905 Used to tighten mounting nuts from the back
of the panel and to replace the cap of the
Lighted Emergency Switch.
Cap Tightening Tool
1108_lu_19_3
--- A22Z-3908 Used for replacing the cap of the Half-guard
Pushbutton Switch.
Cap Puller
1108_lu_19_4
--- A3PJ-5080 Used for removing the cap from the Pushbutton
of the Square Lighted Pushbutton Switch.