Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E3Z-L81-IL3 2M

IO-Link Photoelectric Sensor

Image

Diffuse-reflective, Sensing distance: 60 to 120 mm, IO-Link, Transmission speed: COM3 (230.4 kbps), Light-ON/Dark-ON selectable, PNP output, Pre-wired models (2 m)

Sensing method Diffuse-reflective
Sensing distance 60 mm to 120 mm (White paper 100 x 100 mm)
Light source Red LED (Emission wave length: 650 nm)
Connection method Pre-wired models (Cable length: 2 m)

Item list of E3Z-[]-IL[]

  • Ratings/Performance
ShapeSquare type
Sensing methodDiffuse-reflective
Sensing distance60 mm to 120 mm (White paper 100 x 100 mm)
Spot size2.5 mm dia. (At sensing distance of 90 mm)
Minimum sensing object0.1 mm dia. (Pure copper wire)
Light sourceRed LED (Emission wave length: 650 nm)
Power supply voltage10 to 30 VDC (ripple (p-p) 10% included)
Current consumption30 mA max.
Control outputPNP open collector output
30 VDC max.
Load current: 100 mA max.
Residual voltage: 1 V max. (Load current Less than 10mA)/Residual voltage: 2 V max. (Load current: 10 to 100 mA)
CommunicationsIO-Link Ver1.1
Transmission speed: COM3 (230.4 kbps)
Data length: PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum cycle time: 1 ms
Operation modeLight-ON/Dark-ON selectable
Protective circuitOutput short-circuit protection
Output reverse polarity protection
Power supply reverse polarity protection
Mutual interference prevention
Response time1 ms max.
Sensitivity settingSensitivity adjuster / IO-Link communications
Ambient illuminanceIncandescent lamp: 3000 lux max., Sunlight: 10000 lux max.
Ambient temperature (Operating)-25 to 55 ℃
(with no icing or condensation)
Ambient temperature (Storage)-40 to 70 ℃
(with no icing or condensation)
Ambient humidityOperating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance20 MΩ min. at 500 VDC
Dielectric strength1000 VAC at 50/60 Hz for 1 min
Vibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protectionIEC: IP67
Connection methodPre-wired models (Cable length: 2 m)
IndicatorStandard I/O mode (SIO mode): Operation indicator (orange, lit) and stability indicator (green, lit)
IO-Link mode: Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals)
Weight (packed state)Approx. 65 g
MaterialCase: PBT
Lens: Denatured Polyarylate
Display: Denatured Polyarylate
AccessoriesInstruction manual
  • Dimensions

  • Output circuit

Series

IO-Link Photoelectric Sensor

E3Z-[]-IL[]

about this Product