Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E3S-DCP21-IL2

Color Mark Photoelectric Sensor

Image

Diffuse-reflective (mark detection), Sensing distance: 7 to 13 mm, IO-Link, Transmission speed: COM2 (38.4 kbps), High when mark is detected, Push-pull, M12 connector models, Timer function

Sensing method Diffuse-reflective (mark detection)
Sensing distance 7mm to 13mm (White paper 10 x 10 mm)
Light source Red LED (Emission wave length: 635 nm)
Green LED (Emission wave length: 525 nm)
Blue LED (Emission wave length: 465 nm)
Control output (Output type) Push-pull
Connection method M12 connector models

Item list of E3S-DC

  • Ratings/Performance
Sensing methodDiffuse-reflective (mark detection)
Sensing distance7mm to 13mm (White paper 10 x 10 mm)
Spot size1 x 4 mm
Light sourceRed LED (Emission wave length: 635 nm)
Green LED (Emission wave length: 525 nm)
Blue LED (Emission wave length: 465 nm)
Power supply voltage10 to 30 VDC ±10% (ripple (p-p) 10% included)
Power consumption(DC) 960 mW max. (at power supply voltage of 24 V, current consumption: 40 mA max. )
Control output (Output type)Push-pull
Control output (Load current)100 mA (30 VDC max.)
CommunicationsIO-Link Ver1.1
Transmission speed: COM2 (38.4 kbps)
Data length: PD size: 8 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum cycle time: 4.8 ms
Operation modeHigh when mark is detected
Protective circuitOutput short-cut protection
Output short-circuit protection
Power supply reverse polarity protection
Response time50 µs Max. 2-point teaching mode
150 µs Max. 1-point teaching mode
Sensitivity settingTeaching method
Timer functionSelect from Timer disabled, OFF-delay, ON-delay, One-shot, or ON-delay + OFF-delay timer 0.1ms to 5000ms
Ambient illuminanceIncandescent lamp: 3000 lux max.
Ambient temperatureOperating: -10 to 55℃
Storage: -25 to 70℃
(with no icing or condensation)
Ambient humidityOperating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance20 MΩ min. at 500 VDC
Dielectric strength1000 VAC at 50/60 Hz for 1 min
Vibration resistance10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protectionIEC60529: IP67
Connection methodM12 connector models
IndicatorOperation indicator (orange), RUN indicator (green), 7-segment indicator (white), Key lock indicator (white), Timer indicator (white), 1-point teaching mode indicator (white)
Weight (packed state)Approx. 370 g
Material (case)Zinc diecast
Material (lens)Methacrylate resin
AccessoriesInstruction manual
  • Output circuit

Series

Color Mark Photoelectric Sensor

E3S-DC

about this Product